Contact info:

Jacob Meyer

4901 Duxhall Dr

Lincoln Ne. 68516

402 560 2567

Info@highplainsgunstocks.com

 

 

 

 

Home

Fancy Stock blanks

Photo gallery of past Model 12 stocks

Email for info

 

 

 

 

Scroll to bottom for pricing and ordering details

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Scroll to bottom for pricing and ordering details

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Scroll to bottom for pricing and ordering details

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

Winchester Model 12 stocks and forearms

Welcome to the High Plains Gunstocks Winchester Model 12 page. What you see below is what I can make up for your Winchester Model 12 setup. Although I most definitely do offer finishing service for these stocks, most of the Model 12 stocks I sell are unfinished and pre checkered. What that means is once you have receive your stock and forearm you will have some minor sanding and then finish must be applied. The inletting is already done for you. These unfinished stocks are different in that they are precision machined and will not require 15 to 20 hours of shaping and inletting. One can tell by the example picture of the action inletting below, and by the close up of the checkering, that these are not you ordinary 95% inletted that often look like a beaver chewed on them.  It would be closer to say that these are 99.5% inletted. If you have a little patience and a couple pieces of 150 to 220 grit sand paper you can have a fantastic looking stock with outstanding cut checkering. All checkering IS cut NOT pressed like you see on many cheaper stocks. Please scroll to the bottom to see pricing and ordering details.

 

 

 

    

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FIELD STYLE Winchester model 12 stock black walnut with "B" style checkering. This is a straight stock no cast. Specify "FIELD STYLE" when ordering. Dimensions are 13.25 inch over all. Will give a LOP of 15 inches with a 1 inch pad. Drop at comb is 1 1/4. Drop at the Heel is 2 1/4 inches. Can be made for 12, 16, 20, or 28 Gauge.
MONTE CARLO Winchester model 12 stock, black walnut with "B" style checkering. This is a straight stock no cast. Specify "MONTE CARLO STYLE" when ordering. Dimensions are 13.25 inches overall. Will give a LOP of 15 inches with a 1 inch pad. Drop at comb is level at 1 3/8 inch. Can be made for 12, 16, 20, or 28 Gauge.
ENGLISH STYLE Winchester model 12 stock, black walnut with diamond checkering. This is a straight stock no cast. Specify "ENGLISH STYLE" when ordering. Dimensions are 13 inches overall. Will give a LOP of 14 1/2 with a 1 inch pad. Drop at comb is 1 3/8 down to 2 inches at the heel. Can be made for 12, 16, 20, or 28 Gauge.

 

Note: Overall length is measured from the action to the middle of the end of the stock not to be

confused with length of pull or LOP which is measured from the trigger to the end of the stock

 

 


 

Below are The forearm Checkering styles offered for the Winchester Model 12

forearm. Each forearm measures about 9 3/4 inches long

 

 

Diamond style checkering for Winchester model 12. Can be made for 12, 16, 20, or 28 Gauge.

 

Broken diamond style checkering for Winchester model 12. Can be made for 12, 16, 20, or 28 Gauge.
Winchester "B" style checkering. This one is shown completely finished with satin urethane, My standard finish. Can be made for 12, 16, 20, or 28 Gauge.

 


 Click HERE or on photo below for fancy grade stocks and blanks

 

 

 

 

 

 

 

 

 


 

Below are examples of the checkering close up. All checkering is 18 LPI. (Left) is unfinished black walnut checkering. (Right) is an example of the same checkering finished with a satin urethane.

 

 


Below is an example of the model 12 action inletting you can expect

 

 


 

I can also set your stock up with Gracoil adjustable cheek and or recoil pads. Below is an example of a completely finished set up ready to bolt to the gun. The wood is black walnut. Please scroll down for pricing and order info

 


 

CLICK HERE TO ORDER

 

The first three tables below are for UNFINISHED  stocks and forearms in your choice of either checkered or uncheckered form. All checkering is 18 LPI. Unfinished stocks do NOT come with a recoil pad.

 

Unfinished stocks

Monte Carlo, English, or Field style stock With checkering

          Forearm 9.75 inch with checkering

Black walnut standard grade

 $95

$79

Laminate any color

$105

$90

 

Unfinished stocks

Monte Carlo, English, or Field style stock NO checkering

Forearm 9.75 inch NO checkering

Black walnut standard grade

 $75

$65

Laminate any color

$85

$75

 

Patchmayr 325 white line recoil pad installed on UNFINISHED stock

$35

Limbsaver recoil pad installed on UNFINISHED stock

$50

Gracoil adjustable cheek piece installed on UNFINISHED stock

$150

Gracoil adjustable recoil pad installed on UNFINISHED stock

$200

stock milled for an increased LOP up to 1.5 inches beyond standard

$30

 

CLICK HERE TO ORDER


 

The two tables below are for FINISHED stocks and forearms with your choice of checkering. All checkering is 18 LPI and comes standard. The finish is satin urethane. Finished stocks come with a 1 inch thick Patchmayr 325 white line recoil pad.

Finished stocks

Monte carlo, English, or Field style stocks with checkering

Forearm 9.75 inch with checkering

Black walnut standard grade

$180

$120

Laminate any color

$190

$130

 

Finished stocks

Monte Carlo, English, or Field style stock NO checkering

Forearm 9.75 inch NO checkering

Black walnut standard grade

 $140

$90

Laminate any color

 $155

$95

 

Limbsaver pad upgrade on FINISHED Winchester model 12 stock

$25

Gracoil adjustable cheek piece installed on FINISHED stock

$150

Gracoil adjustable recoil pad installed on FINISHED stock

$200

Stock milled for increased LOP up to 1.5 inches beyond standard

$30

CLICK HERE TO ORDER

contact info:

 

Jacob Meyer

4901 Duxhall Dr

Lincoln Ne. 68516

402-560-2567

 

email: Info@highplainsgunstocks.com